Monday, April 18, 2016

Home Canning

Home canning is a great way to preserve your garden harvest.  It's also a fun family activity that creates good memories and wonderful products that can be savored year round by working together .

BASIC CANNING EQUIPMENT
jars, lids and bands
tongs and jar lifter
stock pot and sauce pan
extra large bowl and medium bowl

STEAM JUICER
I use my steam juicer for just about everything. Grape juice, salsa, marinara, tomato sauce, apple sauce/ juice, pumpkin

VICTORIO STRAINER
Once I've steam juiced the fruit or vegetable, then put it through the strainer.  It automatically strains off the seeds, skins, etc leaving the pulp for salsa, apple sauce, etc.  Love it!

STEAM CANNER
Steam canners are used to seal bottles of fruit or tomato products that have enough acid in them and don't need pressure canning.

PRESSURE CANNER
Pressure canners are used for bottling meats, dry beans, and vegetables other than tomatoes.

TERMS
“Raw Pack” foods that would be delicate after they are cooked, such as whole peaches, are usually easier to handle if they are raw packed. Pack food in jars while it is raw. It should be packed firmly but should not be crushed. After packing, boiling syrup, juice or water is added to foods that require additional fluid. 

“Hot Pack” the hot pack method is generally preferred where the food being canned is relatively firm and handles well. Precooking the food makes it more pliable, permits a tighter pack and requires fewer jars. Generally, the food is first cooked in water, a syrup or in the juice that is extracted.

“Head Space” is the space between the inside of the lid and the top of the food or its liquid. Some foods, especially those that are starchy, swell more in the canner than others and therefore, require more head space.

RESOURCES
Utah State University Extension Service

National Center for Home Food Preservation
http://nchfp.uga.edu/

Ball Brand Blue Book for Home Canning

 Food Storage Organization blog post:


STRAWBERRY JAM
Ingredients:
strawberries
Pectin
sugar
butter

Start by preparing and sterilizing jars and bands in dishwasher and set aside.

Place new lids and bands in large sauce pan and cover with water.  Bring to boil while preparing strawberries.

In extra large bowl, wash strawberries

stem and cut berries in half .

coarsely grind strawberries in blender or food processor.
Measure puree according to recipe and add to stock pot with pectin

bring to boil while stirring for 1 min

add 1/2 tsp. butter to keep foam down while boiling.

measure out sugar in medium bowl according to recipe

add sugar all at once, stir in well

boil 5 more minutes at full rolling boil.

Immediately pour jam into jars, leaving 1/4 inch headspace.

Place lids on each jars and tighten down with bands. Turn upside down for 5-10 min

Turn right side up and let cool and listen for "plink" and you know it's sealed.

When a jar is used up and washed in the dishwasher, place old lid on top of jar upside down so rubber doesn't stick to rim and tighten down band.  This will keep jar clean for the next batch and can be rinsed out in hot water.


BOTTLED BUTTER
Ingredients: 1 pound of butter per pint
I use half and half salted and unsalted butter.  My family thinks it's too salty after it's on the shelf a while if I just use salted butter.

Place jars on baking sheet in over at 250 degrees for 20 min. while preparing butter.

Place new lids and bands in sauce pan and fill with water. Bring to boil.

Slowly melt butter and bring to boil for 5 min. while stirring.
Immediately fill jars to 1/4 inch headspace before separation starts.
Place lids and bands on jars. 
Listen for "plink" and then shake a few times over the next 20 min.
to keep from separating.
While slightly warm, place in refrigerator
for 1 hour. 
Directions found on everythingunderthesunblog.blogspot.com


BOTTLED DRY BEANS
The night before you plan to bottle beans, place them in a large stock pot and cover with 3x more water than beans and let soak over night.

In the morning, drain beans and rinse well. Beans have an enzyme to keep them from sprouting.

 Return beans to stock pot, peel and quarter an onion, add fresh water and bring to boil.
Prepare lids and bands in large sauce pan. Cover with water and bring to boil while beans are boiling.

 Boil beans for 30 min. Then strain out and fill jars to 1 inch head space.

Add 1 tsp salt to each jar.

Fill each jar with water to 1 inch head space. Use tap water instead of water used from boiling beans in order to remove as much of enzyme as possible and help digestion when consuming beans.

 Place lids and bands on jars.

Place jars in the pressure canner and cover with water.

Lock lid in place and bring to boil.  Once steam is coming out of valve, start timing 10 min. This will let all air escape. 

After 10 min, place weight on valve.

Once pressure gauge reaches 10 pounds pressure, start timing processing time. Turn stove unit to low and monitor pressure throughout process, adjusting heat if necessary. Refer to Ball home canning book or extension service web site for pounds and processing time according to your altitude.  After processing time is complete, turn off stove and allow canner to cool.  Do not remove weight until pressure gauge reaches 0.

Use jar lifter to remove bottles from canner and allow to cooling to continue.

 Once bottles are cooled, wipe with damp cloth and label with permanent marker with contents and year.  Enjoy!












Friday, February 26, 2016

DIY Boxwood Wreath

Make your own boxwood wreath, an easy and fun project for any season!

Materials:

2-18 inch wire wreath forms
3- 9ft boxwood garlands
paddle of 26 ga floral wire
blue painter tape (optional)

Tools:
heavy scissors or wire cutters

Begin by cutting all 3 garlands into sprigs that are about 5-6 in long and have 4 knuckles of leaves on each.  You should end up with about 24 sprigs for each garland, total of 72. Make the cut on an angle and as close to the vine as possible so it blends in and isn't a blunt cut that is noticeable.

Make bunches of boxwood that will be attached to the forms by wiring 3 springs together to make each bunch.

Since there is not much stem to work with, thread the wire thru the first group of branches and twist.

Wrap the wire around the stems a few times and end by twisting with the tail that came from between the branches where you started the first twist.

Now you have 1 bunch. Continue making bunches with all the remaining sprigs. You should end up with 24 bunches.

Place wire forms on top of each other, attach end of wire by twisting thru both forms. (I use 2 because it can end up heavy enough to make just 1 form warp and not lay flat against the wall or door.) You are ready to begin attaching bunches. You may want to section off the wreath with blue painters tape (optional) so you have a reference for spacing and the number of bunches.

You will be wrapping the wire around the wreath forms as you add bunches

To help stabilize each bunch, since there aren't really stems to work with, thread wire between a section of branches and keep the stem ends on the inside of the form for uniform direction and coverage on the outside, larger side of the wreath. Then wrap wire over the ends a few times before going to the next bunch.

Continue adding bunches around the wreath and secure and twist off wire when done.

So easy and cute!  You did it!  Great Job!